RIIWHS204D – Work Safely at Heights.

This course is suitable for people working in operational roles where they are required to perform work tasks at heights.

Training and assessment of Work Safely at Heights is conducted over one day. The session runs from 7.45am to 4pm.

Payment is required in advance or by Purchase Order to confirm your booking. All learning materials are provided.

Please bring photo ID, enclosed shoes, suitable outdoor work clothing and if applicable any evidence of prior learning.

The cost of this course is $250. For any enquires or to make a booking please phone 07 4214 0129.

RIIWHS202D – Enter and Work in Confined Spaces Course.

This course is suitable for people working in operational roles undertaking work tasks in confined spaces.

Training and Assessment of the course is conducted over one day. Practical training is performed within a purposely built confined space container. This unit has a strong focus on practical training to ensure participants are well equipped and prepared for working in confined spaces.

The session typically runs from 7.45am to approximately 4pm.

Please bring photo ID, enclosed shoes, suitable outdoor work clothing and if applicable, any evidence of prior experience or certificates.

Payment is required in advance or by Purchase Order to confirm your booking. All learning materials are provided.

The cost of this course is $250. For any enquires or to make a booking please phone 07 4214 0129.

Standard 11

This Standard 11 – Surface Induction has been specifically designed for candidates wishing to obtain a Generic Induction Passport, which will allow them to work on a Coal Mine Site in Queensland.

Upon successful completion of your Standard 11 – Surface Induction 2 day program (partial) you will initially receive:

    • Statement of Completion
    • Workbook – To Be Completed On-site

The candidate must return the workbook within six (6) months from course completion for it to be assessed by Pro-Lift Training FNQ.

Once the workbook has been completed successfully and returned to Pro-Lift Training FNQ for assessment, the candidate will be issued the following:

    • Nationally Recognised Statement of Attainment
    • Standard 11 Surface Induction Hard Card – Valid For Five (5) Years (you must maintain your currency to renew in 5 years time)
    • This program option is great for participants who are already employed and able to be inducted on site after the two day course.

It is a requirement by industry to have the workbook completed onsite before having a Statement of Attainment issued to the candidate. We do recommend contacting the site you work for or intend on working for to confirm any processes they may have in place.

This training program includes the following units of competencies:

    • RIIWHS201D Work safely and follow WHS policies and procedures
    • RIIERR205D Apply initial response First Aid
    • RIIGOV201D Comply with site work processes/procedures
    • RIIRIS201D Conduct local risk control
    • RIICOM201D Communicate in the workplace
    • RIIERR302D Respond to local emergencies and incidents

Candidates of the Standard 11 – Surface Induction will develop real skills by being involved in practical activities conducted at our Cairns training facility. Skills that are fundamentally important to the mining industry such as:

    • Hazard identification
    • Risk control
    • Isolating and tagging
    • Communication
    • Manual handling
    • Use and control of hazardous substances

These skills are an integral part of the Standard 11 – Surface Induction and workshop activities will provide participants with opportunity to develop those skills.

Recognised Standard 11 – Information: The purpose of this standard is to assist sites to establish and maintain a training system which includes processes for identifying and delivering competent, safe and efficient work teams. Recognised Standard 11 compliant Coal Mining Induction training programs have been developed to assist mine sites in meeting their legislative obligations.

Course Outcomes: On successful completion of this training course, candidates will be issued with a Nationally Recognised Statement of Attainment and a Standard 11 – Surface Induction card valid for five (5) years.

Course Pre-Requisites: There are no applicable course pre-requisites.

Language, Literacy and Numeracy: This training program requires basic reading, writing and numeracy skills. Prior to enrolling please contact Pro-Lift Training FNQ to discuss our support services if required.

How to Enrol: If you would like to register for this course please head to our Training Calendar and book online, alternatively contact our office on 07 4214 0129.

Other Courses

  • S123/G189 Supervisors Course (3 Unit Course)
  • RIIHAN301E Operate Elevating Work Platform (under 11 metres)
  • RIIHAN309E Conduct telescopic materials handler operations
  • RIIHAN305D Operate a gantry or overhead crane.
  • RIIHAN307D Operate a vehicle loading crane
  • RIIHAN311E Conduct operations with integrated tool carrier
  • RIIMPO301D Conduct hydraulic excavator operations
  • RIIMPO205D Operate roller/compactor
  • RIIMPO206D Conduct bulk water truck operations
  • RIIMPO304D Conduct wheel loader operations
  • RIIMPO308E Conduct tracked dozer operations
  • RIIMPO310E Conduct grader operations
  • RIIMPO312D Conduct Scraper Operations
  • RIIMPO319D Conduct Backhoe/loader operations
  • RIIMPO325D Conduct civil construction scraper operations
  • RIIMPO320E Conduct civil construction excavator operations
  • RIIMPO321E Conduct civil construction wheeled front end loader operations
  • RIIMPO323D Conduct civil construction dozer Operations
  • RIIMPO324E Conduct civil construction grader operations
  • RIIMPO325D Conduct Civil construction scraper operations
  • RIIMPO334D Conduct skid steer loader operations using attachments
  • RIIMPO337D Conduct articulate haul truck operations

Ready to book your course?